Student tool · Free
Electricity Bill Calculator
Estimate your monthly electricity bill from units used, on the current NEPRA residential tariff — with fixed charges, FPA and 18% GST broken down. Free, no sign-up — everything runs privately in your browser.
The 200-unit line decides your tariff
Pakistan's residential electricity system turns on 200 units a month. Stay at or below 200 units every month and you are a protected consumer on cheaper rates. Cross 200 units even once in the last 6 months and you move to the non-protected rates, where one higher flat rate applies to every unit. The smallest consumers — up to 100 units — fall under lifeline rates.
FESCO is one of the ex-WAPDA distribution companies — all of them use the same national uniform base tariff.
For households above the 200-unit line. One flat rate applies to ALL units, set by the slab your total falls in.
Printed on your bill as units consumed this month. Compare it with the 200-unit line above.
Most homes are 1–5 kW; it is printed on your bill.
Copy the per-unit FPA rate from your last bill — it changes monthly and can be negative.
Copy the per-unit QTA rate from your last bill, if it shows one.
| Bill line | Amount |
|---|---|
| Energy charges (200 units) | Rs 5,782.00 |
| Fixed charge (sanctioned load 2 kW) | Rs 600.00 |
| Fuel & quarterly adjustments (FPA + QTA) × 200 units | Rs 0.00 |
| Subtotal before GST | Rs 6,382.00 |
| GST (18%) | Rs 1,148.76 |
| Estimated bill | Rs 7,530.76 |
Your estimated FESCO bill: Rs 7,530.76
Estimate only, on the NEPRA residential tariff (S.R.O. 279(I)/2026). Electricity duty, TV fee, arrears and the extra income tax for non-filers are NOT included, so your printed bill can differ.
About this tool
About Electricity Bill Calculator
A Pakistani electricity bill looks complicated, but the residential part follows a published tariff: your units fall into a slab with a per-unit rate, a fixed charge is added per kW of sanctioned load, monthly fuel and quarterly adjustments are applied per unit, and 18% GST is charged on the total. This calculator follows the uniform residential tariff notified in NEPRA's S.R.O. 279(I)/2026, which applies to all the ex-WAPDA distribution companies — FESCO, LESCO, IESCO, MEPCO, GEPCO, PESCO, HESCO, SEPCO, QESCO and TESCO — and forms the base of K-Electric's residential tariff too.
Knowing your slab before the bill arrives helps you plan: for non-protected consumers one flat rate applies to every unit, so crossing into the next slab raises the price of all units, not just the extra ones. The estimate here excludes electricity duty, TV fee, arrears and the extra income tax charged to non-filers, so treat it as a close guide rather than the final bill. To see what a change in units does to a household budget in percentage terms, try the percentage change calculator.
NEPRA residential slab rates (S.R.O. 279(I)/2026)
The uniform base tariff below applies to all ex-WAPDA distribution companies — FESCO, LESCO, IESCO, MEPCO, GEPCO, PESCO, HESCO, SEPCO, QESCO and TESCO — and forms the base of K-Electric's residential tariff as well. Fixed charges are per kW of sanctioned load.
Non-protected — one flat rate on ALL units
| Monthly units | Rate (Rs / unit) | Fixed charge (Rs / kW) |
|---|---|---|
| 1 – 100 | 22.44 | 275 |
| 101 – 200 | 28.91 | 300 |
| 201 – 300 | 33.10 | 350 |
| 301 – 400 | 36.46 | 400 |
| 401 – 500 | 38.95 | 500 |
| 501 – 600 | 40.22 | 675 |
| 601 – 700 | 41.85 | 675 |
| Above 700 | 47.20 | 675 |
Protected — progressive rates, up to 200 units a month
| Units | Rate (Rs / unit) | Fixed charge (Rs / kW) |
|---|---|---|
| First 100 units | 10.54 | 200 |
| Next 100 units (101 – 200) | 13.01 | 300 |
Protected status depends on your history, not just this month: using more than 200 units in any month of the last 6 months moves you to the non-protected rates.
Lifeline — up to 100 units a month
| Units | Rate (Rs / unit) | Fixed charge |
|---|---|---|
| 1 – 50 | 3.95 | None (Rs 75 minimum bill) |
| 51 – 100 | 7.74 | None (Rs 75 minimum bill) |
Worked example — the cost of the 200-unit line: exactly 200 units on a 2 kW connection, before FPA/QTA. Protected: energy 100 × 10.54 + 100 × 13.01 = Rs 2,355, fixed charge Rs 600, GST 18% = Rs 531.90, total Rs 3,486.90. Non-protected: energy 200 × 28.91 = Rs 5,782, fixed charge Rs 600, GST 18% = Rs 1,148.76, total Rs 7,530.76 — more than double, for the same 200 units.
Estimate only: electricity duty, TV fee, arrears, late surcharges and non-filer income tax are not included, and FPA/QTA change monthly. Rates: NEPRA S.R.O. 279(I)/2026, February 2026.
Every company, one national tariff
Pakistan's electricity is supplied by eleven distribution companies. The ten ex-WAPDA companies (DISCOs) all charge residential consumers under the same national uniform base tariff — the slab you fall into and the 200-unit protected rule work identically whether your bill comes from FESCO in Faisalabad or PESCO in Peshawar. K-Electric, which serves Karachi, uses the same base tariff with its own monthly and quarterly adjustments. Select your company in the calculator above; the rates do not change, only the name on your estimate.
| Company | Full name | Main area served |
|---|---|---|
| FESCO | Faisalabad Electric Supply Company | Faisalabad, Jhang, Sargodha, Mianwali and nearby districts |
| LESCO | Lahore Electric Supply Company | Lahore, Kasur, Sheikhupura, Nankana Sahib, Okara |
| IESCO | Islamabad Electric Supply Company | Islamabad, Rawalpindi, Attock, Jhelum, Chakwal |
| MEPCO | Multan Electric Power Company | Multan and South Punjab |
| GEPCO | Gujranwala Electric Power Company | Gujranwala, Sialkot, Gujrat, Narowal and nearby districts |
| PESCO | Peshawar Electric Supply Company | Peshawar and most of Khyber Pakhtunkhwa |
| HESCO | Hyderabad Electric Supply Company | Hyderabad and interior Sindh (outside SEPCO areas) |
| SEPCO | Sukkur Electric Power Company | Sukkur, Larkana and upper Sindh |
| QESCO | Quetta Electric Supply Company | Quetta and Balochistan |
| TESCO | Tribal Electric Supply Company | The tribal districts of Khyber Pakhtunkhwa |
| K-Electric | K-Electric Limited | Karachi and nearby areas of Sindh and Balochistan |
Guide
How it works
- Select your electricity company — FESCO, LESCO, IESCO, MEPCO, GEPCO, PESCO, HESCO, SEPCO, QESCO, TESCO or K-Electric.
- Pick your category: protected (up to 200 units a month), lifeline (up to 100 units) or non-protected — or choose Custom rates to type in your own rates.
- Enter units consumed and your sanctioned load. For the closest estimate, copy the FPA and QTA per-unit rates from your last bill.
- Read the line-by-line breakdown: energy charges, fixed charge, adjustments, 18% GST and the estimated total.
🔒 Privacy note: this tool runs entirely in your browser. Your files are never uploaded to any server.
Good to know
Tips & good to know
- For the closest estimate, copy the FPA and QTA rates (Rs per unit) from your last printed bill — both change from month to month.
- Non-protected consumers pay one flat rate on ALL units: using 201 units instead of 200 reprices every unit at the higher slab, which is why bills jump sharply at slab boundaries.
- Protected status depends on your last 6 months: use more than 200 units in any one of those months and you are moved to the non-protected tariff, where the higher flat rate applies to every unit.
- This estimate excludes electricity duty, the TV fee, arrears and non-filer income tax, so your printed bill can be somewhat higher.
FAQ
Frequently asked questions
What is the 200-unit rule for electricity bills in Pakistan?
Your monthly units decide your tariff category. Consumers who stay at or below 200 units a month are billed on the cheaper protected rates. But if you use more than 200 units in any month of the last 6 months, you are moved to the non-protected tariff, where one higher flat rate applies to all of your units. That is why a single heavy month — extra fans, an AC, guests — can raise your bills for months afterwards.
What is the difference between protected, lifeline and non-protected consumers?
Lifeline consumers use up to 100 units a month and pay the lowest rates with no fixed charge. Protected consumers use up to 200 units a month and pay progressive rates (Rs 10.54 per unit for the first 100 units, Rs 13.01 for the next 100). Non-protected consumers pay one flat rate on all units — from Rs 22.44 per unit up to 100 units, rising to Rs 47.20 per unit above 700 units — plus a higher fixed charge per kW.
How do I estimate my FESCO bill?
Select FESCO at the top of the calculator, choose your category (protected, lifeline or non-protected), and enter the units from your meter or last bill plus your sanctioned load. The same steps work for every company — LESCO, IESCO, MEPCO, GEPCO, PESCO, HESCO, SEPCO, QESCO, TESCO and K-Electric — because the base tariff is national. Your estimate is labelled with your company's name, and copying the FPA and QTA rates from your last printed bill makes it closer.
Is the per-unit rate the same for LESCO, MEPCO and FESCO?
Yes. All ex-WAPDA distribution companies charge the same slab rates and fixed charges under the national uniform tariff notified by NEPRA — a unit costs the same in Lahore, Multan or Faisalabad. Printed bills still differ slightly between companies and months because the fuel price adjustment (FPA), quarterly adjustment (QTA) and provincial electricity duty vary.
Does this work for K-Electric bills?
Yes, with one caution. K-Electric follows the same national base tariff, but its monthly fuel and quarterly adjustments can differ from the ex-WAPDA companies. Select K-Electric, copy the FPA and QTA rates from your own KE bill, or use Custom rates mode to enter the exact rates printed on your bill.
What if my rates are different from the presets?
Choose Custom rates mode. You can edit the slab rates, the fixed charge, the GST percentage and the FPA/QTA rates yourself — useful if the tariff changes, if your connection is not a standard residential one, or if you want to match a specific printed bill exactly. Remember the result is an estimate: electricity duty, the TV fee, arrears and non-filer income tax are not included in any mode.
Go deeper · Guide · 6 min read
How to Calculate Percentage: Formula, Examples & Exam Marks Guide
Learn the percentage formula with simple step-by-step examples — including how to calculate your exam marks percentage the way Pakistani boards do it.
Read the guideKeep going